Всем привет.
Пытаюсь обновить IOS на маршрутизаторе CISCO 1921
На флеш память загрузил образ.
А на выходе получаю следующие ошибки. Подскажите куда копать, почему пытается загрузить образ с tftp ?
gw01(config)#boot system flash:c1900-universalk9-mz.SPA.155-3.M5.bin
gw01#wr
gw01#reload
Proceed with reload? [confirm]y
Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
program load complete, entry point: 0x80903000, size: 0x4c4a0
IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x4853ffc
Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x01E8F000
Rounded IOMEM up to: 32MB.
Using 6 percent iomem. [32MB/512MB]
%SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
%IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = ipbasek9 and License = ipbasek9
%IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = c1900 Next reboot level = datak9 and License = datak9
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... File read failed -- Timed out.
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... File read failed -- Timed out.
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... File read failed -- Timed out.
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... File read failed -- Timed out.
% Crashinfo may not be recovered at usbflash0:crashinfo
% This file system device reports an error
%Error opening t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... (Timed out)
Retrying...
%Error opening t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... (Timed out)
Retrying...
%Error opening t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... (Timed out)
Retrying...
%Error opening t
ftp://255.255.255.255/c1900-universalk9-mz.SPA.155... (Timed out)
%Error
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/flash:c1900-universalk9-mz.S... File read failed -- Timed out.
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/flash:c1900-universalk9-mz.S... File read failed -- Timed out.
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/flash:c1900-universalk9-mz.S... File read failed -- Timed out.
%SYS-6-READ_BOOTFILE_FAIL: t
ftp://255.255.255.255/flash:c1900-universalk9-mz.S... File read failed -- Timed out.
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
%MAINBOARD_GE-3-SHUTDOWN: FPA PKT pool holding 512 particles.boot of "tftp:c1900-universalk9-mz.SPA.155-3.M5.bin 255.255.255.255" using boot helper "usbflash0:c1900-universalk9_npe-mz.SPA.155-3.M.bin" failed
error returned: tftp:c1900-universalk9-mz.SPA.155-3.M5.bin 255.255.255.255
loadprog: error - on file open
boot: cannot load "tftp:c1900-universalk9-mz.SPA.155-3.M5.bin 255.255.255.255"
System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
Technical Support:
www.cisco.com/techsupport
Copyright (c) 2012 by cisco Systems, Inc.
Total memory size = 512 MB
CISCO1921/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC disabled
Readonly ROMMON initialized
program load complete, entry point: 0x80903000, size: 0x4c4a0
IOS Image Load Test
___________________
Digitally Signed Release Software
program load complete, entry point: 0x81000000, size: 0x4c0464c
Self decompressing the image : #################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################### [OK]
Smart Init is enabled
smart init is sizing iomem
TYPE MEMORY_REQ
Onboard devices &
buffer pools 0x01E8F000
-----------------------------------------------
TOTAL: 0x01E8F000
Rounded IOMEM up to: 32MB.
Using 6 percent iomem. [32MB/512MB]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.5(3)M5, RELEASE SOFTWARE (fc1)
Technical Support:
www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Wed 25-Jan-17 02:48 by prod_rel_team
A summary of U.S. laws governing Cisco cryptographic products may be found at:
www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco CISCO1921/K9 (revision 1.0) with 491520K/32768K bytes of memory.
Processor board ID FCZ2008934V
2 Gigabit Ethernet interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
245744K bytes of USB Flash usbflash0 (Read/Write)
Press RETURN to get started!
DOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
*May 18 18:36:31.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
*May 18 18:36:35.671: %USBFLASH-5-CHANGE: usbflash0 has been inserted!
*May 18 18:36:38.799: %SYS-5-LOG_CONFIG_CHANGE: Buffer logging: level warnings, xml disabled, filtering disabled, size (51200)
*May 18 18:36:39.443: NAT: SIP service disabled for TCP port: 5060
*May 18 18:36:39.503: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 103.224.212.253 port 0 CLI Request Triggered
*May 18 18:36:39.587: %SYS-5-CONFIG_I: Configured from memory by console
*May 18 18:36:40.111: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to down
*May 18 18:36:40.111: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, changed state to up
*May 18 18:36:41.103: %LINK-5-CHANGED: Interface Embedded-Service-Engine0/0, changed state to administratively down
*May 18 18:36:42.115: %LINEPROTO-5-UPDOWN: Line protocol on Interface Embedded-Service-Engine0/0, changed state to down
*May 18 18:36:44.171: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.5(3)M5, RELEASE SOFTWARE (fc1)
Technical Support:
www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Wed 25-Jan-17 02:48 by prod_rel_team
*May 18 18:36:45.071: %SYS-6-BOOTTIME: Time taken to reboot after reload = 522 seconds
*May 18 18:36:46.031: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*May 18 18:36:46.031: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*May 18 18:36:46.031: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*May 18 18:36:46.031: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*May 18 18:36:46.659: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 103.224.212.253 port 514 started - CLI initiated
*May 18 18:36:49.055: %LINEPROTO-5-UPDOWN: Line protocol on Interface Tunnel0, changed state to up
% Password expiration warning.
-----------------------------------------------------------------------
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username privilege 15 secret 0
Replace and with the username and password you want to
use.
-----------------------------------------------------------------------
gw01>
Простой
