@mishablokhin
Работаю системным администратором

Как отсрочить запуск сервиса на Raspbian?

Добрый день, уважаемые пользователи Тостера.
Имеется Raspberry Pi 3 B+ с установленной Raspbian и белым статическим адресом за маршрутизатором. Мне необходимо использовать микрокомпьютер как SOCKS5 прокси сервер. Установил и сконфигурировал Danted, включил его автозапуск, но после перезагрузки системы при выполнении sudo systemctl status danted получаю ошибку:
Ошибка
15:36:47 raspberrypi systemd[1]: Starting SOCKS (v4 and v5) proxy daemon (danted)...
янв 09 15:36:47 raspberrypi danted[385]: Jan  9 15:36:47 (1547037407.546203) danted[385]: warning: int_ifname2sockaddr(): interface "eth0" has no usable IP-addresses configured
янв 09 15:36:47 raspberrypi danted[385]: Jan  9 15:36:47 (1547037407.551843) danted[385]: error: /etc/danted.conf: problem on line 6 near token "eth0": could not resolve hostname "eth0": Temporary failure in name resolution.  
янв 09 15:36:47 raspberrypi danted[385]: Jan  9 15:36:47 (1547037407.551956) danted[385]: alert: mother[1/1]: shutting down
янв 09 15:36:47 raspberrypi systemd[1]: danted.service: Control process exited, code=exited status=1
янв 09 15:36:47 raspberrypi systemd[1]: Failed to start SOCKS (v4 and v5) proxy daemon (danted).
янв 09 15:36:47 raspberrypi systemd[1]: danted.service: Unit entered failed state.
янв 09 15:36:47 raspberrypi systemd[1]: danted.service: Failed with result 'exit-code'.

Если после этого выполнить sudo systemctl restart danted, то сервис прекрасно запускается и работает.
Как я понял, ошибка случается из-за того, что Danted запускается быстрее, чем поднимается интерфейс на Малинке. Я попробовал добавить параметр sleep 30, но это не дало желаемого эффекта: после перезагрузки системы по-прежнему ошибка.
Код конфигов прикрепляю:
/etc/danted.conf
# $Id: sockd.conf,v 1.52.10.2 2014/09/03 14:49:13 michaels Exp $

logoutput: stderr

internal: 0.0.0.0 port = 7777
external: eth0
socksmethod: username
user.privileged: root
user.unprivileged: nobody

client pass {
       from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0
       log: error
       socksmethod: username
}



socks pass {
       from: 0.0.0.0/0 to: 0.0.0.0/0
       command: bind connect udpassociate
       log: error
       socksmethod: username
}

socks pass {
       from: 0.0.0.0/0 to: 0.0.0.0/0
       command: bindreply udpreply
       log: error
}
/etc/init.d/danted
#! /bin/sh
### BEGIN INIT INFO
# Provides:          danted
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: SOCKS (v4 and v5) proxy daemon (danted)
# Description:       Starts or stops the Dante SOCKS proxy daemon.
#                    Its configuration is stored in the /etc/danted.conf file;
#                    see the danted.conf(5) manual page for details.
### END INIT INFO
#
# dante SOCKS server init.d file. Based on /etc/init.d/skeleton:
# Version:	@(#)skeleton  1.8  03-Mar-1998  miquels@cistron.nl

. /lib/lsb/init-functions

PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/danted
NAME=danted
DESC="Dante SOCKS daemon"
PIDFILE=/var/run/$NAME.pid
CONFFILE=/etc/$NAME.conf


test -f $DAEMON || exit 0

set -e

# This function makes sure that the Dante server can write to the pid-file.
touch_pidfile ()
{
 sleep 30
 if [ -r $CONFFILE ]; then
    uid="`sed -n -e 's/[[:space:]]//g' -e 's/#.*//' -e '/^user\.privileged/{s/[^:]*://p;q;}' $CONFFILE`"
    if [ -n "$uid" ]; then
      touch $PIDFILE
      chown $uid $PIDFILE
    fi
  fi
}
		
case "$1" in
  start)
	if ! egrep -cve '^ *(#|$)' \
	    -e '^(logoutput|user\.((not)?privileged|libwrap)):' \
	    $CONFFILE > /dev/null
	then
		echo "Not starting $DESC: not configured."
		exit 0
	fi
	echo -n "Starting $DESC: "
        <b>sleep 30</b>
	touch_pidfile
	start-stop-daemon --start --quiet --oknodo --pidfile $PIDFILE \
		--exec $DAEMON -- -D
	echo "$NAME."
	;;
  stop)
	echo -n "Stopping $DESC: "
	start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE \
		--exec $DAEMON
	echo "$NAME."
	;;
  reload|force-reload)
	#
	#	If the daemon can reload its config files on the fly
	#	for example by sending it SIGHUP, do it here.
	#
	#	If the daemon responds to changes in its config file
	#	directly anyway, make this a do-nothing entry.
	#
	 echo "Reloading $DESC configuration files."
	 start-stop-daemon --stop --signal 1 --quiet --pidfile \
		$PIDFILE --exec $DAEMON -- -D
  ;;
  restart)
	#
	#	If the "reload" option is implemented, move the "force-reload"
	#	option to the "reload" entry above. If not, "force-reload" is
	#	just the same as "restart".
	#
	echo -n "Restarting $DESC: "
	start-stop-daemon --stop --quiet --pidfile $PIDFILE --exec $DAEMON
	sleep 1
	touch_pidfile
	start-stop-daemon --start --quiet --pidfile $PIDFILE \
	  --exec $DAEMON -- -D
	echo "$NAME."
	;;
  status)
	if ! egrep -cve '^ *(#|$)' \
	    -e '^(logoutput|user\.((not)?privileged|libwrap)):' \
	    $CONFFILE > /dev/null
	then
		configured=''
	else
		configured='1'
	fi
	if start-stop-daemon --status --quiet --pidfile $PIDFILE \
	  --exec $DAEMON; then
		if [ -n "$configured" ]; then
			echo "$DESC running"
		else
			echo "$DESC running, yet not configured?!"
		fi
	else
		if [ -n "$configured" ]; then
			echo "$DESC not running"
		else
			echo "$DESC not configured"
		fi
	fi
	;;
  *)
	N=/etc/init.d/$NAME
	# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
	echo "Usage: $N {start|stop|restart|force-reload|status}" >&2
	exit 1
	;;
esac

exit 0

Буду благодарен за помощь. Заранее спасибо!
  • Вопрос задан
  • 233 просмотра
Решения вопроса 1
Найдите где у вас действующий конфиг для Systemd - файл sockd.service
И попробуйте изменить и добавить строки
After=network-online.target
Wants=network-online.target


//Был включен dhcp. Dante запускался до получения адресом. Лучше настроить статику.
Ответ написан
Пригласить эксперта
Ваш ответ на вопрос

Войдите, чтобы написать ответ

Войти через центр авторизации
Похожие вопросы