@Axeles
Нечего тут пока писать

Почему не запускаются X11?

Добрый день! Добрые люди помогите пожалуйста как запустить X11 на старом пк. Устанавливал иксы следующей командой
sudo apt-get install --no-install-recommends xserver-xorg x11-xserver-utils xinit openbox -y
, на виртуалке всё работает на реальном железе не в какую(
Конфигурация пк
H/W path        Device     Class       Description
==================================================
                           system      PROD00000000
/0                         bus         nForce
/0/0                       memory      128KiB BIOS
/0/4                       processor   AMD Sempron(tm) Processor 2600+
/0/4/8                     memory      128KiB L1 cache
/0/4/9                     memory      128KiB L2 cache
/0/1a                      memory      768MiB System Memory
/0/1a/0                    memory      256MiB DIMM
/0/1a/1                    memory      512MiB DIMM
/0/100                     bridge      nForce3 250Gb Host Bridge
/0/100/1                   bridge      nForce3 250Gb LPC Bridge
/0/100/1.1                 bus         nForce 250Gb PCI System Management
/0/100/2                   bus         CK8S USB Controller
/0/100/2/1      usb2       bus         OHCI PCI host controller
/0/100/2.1                 bus         CK8S USB Controller
/0/100/2.1/1    usb3       bus         OHCI PCI host controller
/0/100/2.2                 bus         nForce3 EHCI USB 2.0 Controller
/0/100/2.2/1    usb1       bus         EHCI Host Controller
/0/100/5        enp0s5     bridge      CK8S Ethernet Controller
/0/100/6                   multimedia  nForce3 250Gb AC'97 Audio Controller
/0/100/8                   storage     CK8S Parallel ATA Controller (v2.5)
/0/100/a                   storage     nForce3 Serial ATA Controller
/0/100/b                   bridge      nForce3 250Gb AGP Host to PCI Bridge
/0/100/b/0                 display     RV350 [Radeon 9550/9600/X1050 Series]
/0/100/b/0.1               display     RV350 [Radeon 9550/9600/X1050 Series] (Secondary)
/0/100/e                   bridge      nForce3 250Gb PCI-to-PCI Bridge
/0/101                     bridge      K8 [Athlon64/Opteron] HyperTransport Technology Configuration
/0/102                     bridge      K8 [Athlon64/Opteron] Address Map
/0/103                     bridge      K8 [Athlon64/Opteron] DRAM Controller
/0/104                     bridge      K8 [Athlon64/Opteron] Miscellaneous Control
/0/1            scsi2      storage
/0/1/0.0.0      /dev/sda   disk        8012MB 8GB SATA Flash D
/0/1/0.0.0/1    /dev/sda1  volume      731MiB Linux filesystem partition
/0/1/0.0.0/2    /dev/sda2  volume      6908MiB Extended partition
/0/1/0.0.0/2/5  /dev/sda5  volume      6908MiB Linux LVM Physical Volume partition

Лог ошибки из файла "/home/kiosk/.local/share/xorg/Xorg.0.log"

https://dropmefiles.com/0Ljlf
  • Вопрос задан
  • 179 просмотров
Пригласить эксперта
Ответы на вопрос 1
@Axeles Автор вопроса
Нечего тут пока писать
Вывод команды sudo lshw -c video
*-display:0
description: VGA compatible controller
product: RV350 [Radeon 9550/9600/X1050 Series]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: agp agp-3.0 pm vga_controller bus_master cap_list rom
configuration: driver=radeon latency=32 mingnt=8
resources: irq:16 memory:d0000000-d7ffffff ioport:a000(size=256) memory:e9000000-e900ffff memory:e8000000-e801ffff
*-display:1 UNCLAIMED
description: Display controller
product: RV350 [Radeon 9550/9600/X1050 Series] (Secondary)
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0.1
bus info: pci@0000:01:00.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm cap_list
configuration: latency=32 mingnt=8
resources: memory:d8000000-dfffffff memory:e9010000-e901ffff
Ответ написан
Ваш ответ на вопрос

Войдите, чтобы написать ответ

Войти через центр авторизации
Похожие вопросы