Как решить проблему после замены материнской платы в Lenovo ThinkPad X1?

Добрый день. После замены материнской платы на ноутбуке Lenovo ThinkPad X1, при включении выскакивают два сообщения c 4-мя короткими звуковыми сигналами биоса (это проблема материнки, а именно чипа безопасности):
machine type and serial number are invalid
machine UUID is invalid

Недолгий поиск подсказал, что нужно сделать Flash Recovery Boot Block Jumper, однако во всех инструкциях есть пункт про смену положения перемычки, которой я не нашел в ноутбуке, ибо способ для стационарных компьютеров, кажется.
В мануале с сайта lenovo описаны способы устранения проблемы:
Serial number

Restoring the serial number of the system unit
When the computer was manufactured, the EEPROM on the system board was loaded with the serial
numbers of the system and all major components. These numbers need to remain the same throughout
the life of the computer.
If you replace the system board, you must restore the serial number of the system unit to its original value.
Before replacing the system board, save the original serial number by doing the following:
1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer.
2. From the main menu, select 1. Set System Identification.
3. Select 2. Read S/N data from EEPROM.
UUID

Retaining the UUID
The Universally Unique Identifier (UUID) is a 128-bit number uniquely assigned to your computer at
production and stored in the EEPROM of your system board. The algorithm that generates the number is
designed to provide unique IDs until the year A.D. 3400. No two computers in the world have the same
number.
When you replace the system board, you must set the UUID on the new system board as follows:
1. Install the ThinkPad Hardware Maintenance Diskette Version 1.73 or later, and restart the computer.
2. From the main menu, select 4. Assign UUID. A new UUID is created and written. If a valid UUID already
exists, it is not overwritten.

Все вроде понятно, только где взять ThinkPad Hardware Maintenance Diskette Version 1.73, которая недоступна общей публике и пользователям. Доступ есть только для уполномоченных лиц, инженеров и обслуживающего персонала, имеющего доступ к этому софту.

Вопрос заключается в следующем: Где добыть этот софт или как другими методами избавиться от этих сообщений и пиликанья спикера?

Заранее благодарен.
  • Вопрос задан
  • 7246 просмотров
Пригласить эксперта
Ответы на вопрос 1
Ваш ответ на вопрос

Войдите, чтобы написать ответ

Войти через центр авторизации
Похожие вопросы